Fox New Products

	KL5 Series “KL5” electronic pressure switches permit the actuation of an electronic micro-switch upon reaching a predetermined pressure setting and to the continuous regulation of the hysteresis value. The right hand lever mounted on the instrument that is rotated forward to increase and reverse to decrease controls the maximum set point. The minimum set point of pressure hysteresis is adjustable by rotating the left hand lever of the instrument. The instrument completely solid state, it is totally without electromechanical or dynamic parts.
	FL4 Series The electronic pressure switch “FL4” series, designed for pneumatic use, allow the commutations of two electronic micro-switches once two different preset pressure values are reached. They are provide with a 1>5 Volts analog output. Supply with protective mask and panel fastener , this pressure switch thanks to small dimensions and to three and a half digit display is a product right for many applications with air , not corrosive and not combustible gas.
	FL5 Series The pressure-switches “FL5” series allow the commutation of two electronic micro-switches when two different pressure preset values are reached. The assembly system of this series of pressure switches permits the rotation of the display about the body’s axis. Available in one piece execution whit M3 or M12 electric connection or in separate body execution with 2 metres of wire(C2).
	XT5 Series The adjustable electronic thermostat “XT5” is projected to commutate an exchange electric contact when the temperature reach a temperature value settled by the user. A bicolour led signals the commutation of the electric contact. The adjustment of the operating point is made by using the trimmer on the top of the instrument, protected from the impurity and from accidental tampering with a pressure cap. Turning on the clockwise the operating value increases on the contrary the value decreases.
	TMR4 Series “TMR4” series is a temperature switch with fixed intervention point and incorporated power relay that allow to charge on the contacts till 30A. This product is indicated for the customers that want to reduce the time and the costs of assembly and wiring because they can connect directly the thermostat to the component of the system that must be controlled
	LG1 Series “LG1” vertical operation level gauges series are suitable to signal the minimum or maximum level of a fluid in the tank. The fixing flange foresees three fixing typologies in only one execution as well as to have standard the electric exchange contacts. “LG1R” series is the execution with the possibility of regulating the height of the float, while the “LG1T” series includes also the electric contact for the control of the temperature